Mild Steel Angle

Mild Steel Angle Supplier

Mild steel angle is a product which has two legs that form a 90 degree angle.

Mild Steel Angle Galvanized

A mild steel angle galvanized is an angle-shaped piece of mild steel that is galvanized. Hot-dip galvanization is the process of adding a fine layer of zinc to steel products. This is done by placing the steel in a molten zinc bath at a temperature of approximately 860°F (460°C). When the steel is exposed to the

Mild Steel Angle Hot Rolled

Mild Steel Angle Hot Rolled is an angle shaped, hot rolled mild steel.

Hot rolled steel is formed through a metal rolling process where the steel is pressed at temperatures above the its recrystallization threshold. This makes the steel easier to form, and results in products that Steel Depots is a certified of Mild Stee Angle Suppliers In Ontario, Quebec & Alberta (Canada). With a portfolio of all types of angle bars -stainless steel angle bar, stainless steel angle bar equal, stainless steel angle bar hot rolled and cold drawn, and many more, Towers / Bridges / Construction purpose / galvanising

Equal Angles: 25 x 25 x 3mm to 130 x 130 x 12mm

Size in mm	Average Weight
Size in mm	KG/MTR	KG/FT
25 x 25 x 3	1.10	0.30
25 x 25 x 5	1.80	0.50
25 x 25 x 6	2.10	0.60
30 x 30 x 3	1.40	0.40
35 x 35 x 3	1.60	0.50
35 x 35 x 4	2.10	0.60
35 x 35 x 5	2.60	0.80
37 x 37 x 3	1.70	0.50
40 X 40 X 3	1.80	0.055
40 x 40 x 4	2.40	0.70
40 x 40 x 5	3.00	0.90
40 x 40 x 6	3.50	1.10
45 x 45 x 4	2.70	0.80
45 x 45 x 5	3.40	1.00
45 x 45 x 6	4.00	1.22
50 x 50 x 3	2.30	0.70
50 x 50 x 4	3.00	0.90
50 x 50 x 5	3.80	1.20
50 x 50 x 6	4.50	1.40
50 x 50 x 8	5.84	1.78
55 x 55 x 4	3.30	1.00
55 x 55 x 5	4.10	1.30
60 x 60 x 4	3.70	1.10
60 x 60 x 5	4.50	1.40
60 x 60 x 6	5.40	1.64
65 x 65 x 4	4.00	1.20
65 x 65 x 5	4.90	1.50
65 x 65 x 6	5.80	1.80
65 x 65 x 8	7.70	2.40
65 x 65 x 10	9.40	2.90
65 x 65 x 12	11.80	3.60
70 x 70 x 7	7.38	2.25
75 x 75 x 5	5.70	1.70
75 x 75 x 6	6.80	2.10
75 x 75 x 8	8.90	2.70
75 x 75 x 10	11.0	3.40
75 x 75 x 12	13.1	4.00
80 x 80 x 6	7.20	2.19
80 x 80 x 7	7.90	2.90
80 x 80 x 8	9.60	2.90
90 x 90 x 6	8.20	2.50
90 x 90 x 7	9.50	2.90
90 x 90 x 8	10.80	3.10
90 x 90 x 10	13.40	4.10
98 x 98 x 9.5	13.09	3.99
100 x 100 x 6	9.20	2.80
100 x 100 x7	10.7	3.30
100 x 100 x 8	12.10	3.70
100 x 100 x 10	14.90	4.50
100 x 100 x 12	17.70	5.40
110 x 110 x 8	13.40	4.08
110 x 110 x10	16.50	5.03
110 x 110 x 12	19.6	5.97
130 x 130 x 8	15.9	4.85
130 x 130 x 10	19.7	6.01
130 x 130 x 12	23.4	7.13

MS Unequal Angles: 45 x 30 x 4/5

Size in mm	Average Weight
Size in mm	KG/MTR	KG/FT
45 x 30 x 4	2.23	0.68
45 x 30 x 5	2.75	0.80

Rolling Tolerances

Leg length	Sectional weight	Length
Up to 45 mm : ± 1.5 mm 45 mm to 100 mm : ± 2 mm above 100 mm : ± 2 %	3 mm thickness : ± 5 % Over 3 mm thickness :+5/-3%	Size 10 to 16 mm ± 5 % 16 mm and above ± 3 %	For fixed length : ± 100 mm

HxB (mm)		T (mm)	Kg/m	R	L (m)
13 x 13	x	3	0.54	0.8	6.0
15 x 15	x	3	0.64	0.8	6.0
16 x 16	x	3	0.68	0.8	6.0
20 x 20	x	3	0.88	3.5	6.0
25 x 25	x	3	1.11	3.5	6.0
		4	1.45
		5	1.77
30 x 30	x	3	1.35	5.0	6.0
		5	2.17
40 x 40	x	3	1.82	6.0	6.0
		4	2.40
		5	2.96
		6	3.50
45 x 45	x	5	3.35	7.0	6.0
		6	3.97
50 x 50	x	3	2.29	7.0	6.0
		4	3.03
		5	3.75
		6	4.45
		8	5.80
60 x 60	x	5	4.53	8.0	6.0
		6	5.39
		8	7.06
		10	8.67
70 x 70	x	6	6.34	9.0	6.0
		8	8.33
		10	10.25
75 x 75	x	6	6.81	9.0	6.0
		8	8.96
		10	11.04
80 x 80	x	6	7.29	10.0	6.0
		8	9.59
		10	11.83
90 x 90	x	6	8.23	11.0	6/12.0
		8	10.85
		10	13.40
		12	15.90
100 x 100	x	8	12.11	12.0	6/12.0
		10	14.98
		12	17.79
120 x 120	x	8	14.63	13.0	6/12.0
		10	18.14
		12	21.57
150 x 150	x	10	22.87	16.0	6/12.0
		12	27.30

DIMENSIONAL TOLERANCES

External dimensions (H x B) mm				Thickness (T) mm
Tolerance band			Tol ± (mm)	Tolerance band			Tol ± (mm)
13	–	50	1.0	3	–	5	0.5
50	–	100	2.0	5	–	10	0.75
100	–	150	3.0	10	–	15	1.0
150	–	200	4.0	15	–	20	1.2
200	–	250	+6 -4
SQUARENESS OF SECTION
Tolerance band							Tol ± (mm)
13			–	100			1.0
100			–	150			1.5
150			–	200			2.0
200			–	250			3.0